STC
STC
48V Cutter Deck
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 461854 | Cutter Deck Velocity Plus | ||
| 2 | 43686 | Boss, Spring Anchor | ||
| 3 | 04019-04 | Nut, 3/8-16 Serrated Flange | ||
| 4 | 481625-01 | Wing Nut, 3/8-16 | ||
| 5 | 481632 | Anti-Scalp Wheel | ||
| 6 | 04003-26 | Bolt, Carriage 3/8-16 x 4” | ||
| 7 | 422478 | Bracket, Anti-Scalp Wheel | ||
| 8 | 04017-27 | Bolt, Serrated Flange 3/8-16 x 1” | ||
| 9 | 04043-06 | Flatwasher, 5/8” Hardened | ||
| 10 | 04021-05 | Locknut, 3/8-16 Center Lock | ||
| 11 | 461844 | Discharge Chute | ||
| 12 | 04001-11 | Bolt, Hex Head 5/16-18 x 1-1/2”, Rear | ||
| 04001-12 | Bolt, Hex Head 5/16-18 x 1-3/4”, Front | |||
| 13 | 04021-10 | Nut, Elastic Stop 5/16-18 | ||
| 14 | 04020-09 | Nut, 5/8-11 UNC | ||
| 15 | 45944 | Shaft, Roller | ||
| 16 | 04001-41 | Bolt, Hex Head 5/8-11 x 9-1/2” | ||
| 17 | 48038 | Roller, Rear | ||
| 18 | 04001-154 | Bolt, Hex Head 5/16-18 x 4-3/4” | ||
| 19 | 04063-08 | Key, 1/4 x 1/4 x 2” | ||
| 20 | 483246 | Spring, Idler LH | ||
| 21 | 04043-04 | Flatwasher, 3/8” | ||
| 22 | 04001-176 | Bolt, Hex Head 5/16-18 x 1-3/4” Grade 8 | ||
| 23 | 04019-03 | Nut, Serrated Flange 5/16-18 | ||
| 24 | 04001-51 | Bolt, Hex Head 3/8-16 x 3-3/4” | ||
| 25 | 48100-15 | Bushing, .376 ID Oilite | ||
| 26 | 04030-03 | Lockwasher 5/16” | ||
| 27 | 04040-15 | Flatwasher 5/16” | ||
| 28 | 04001-136 | Bolt, Hex Head 3/8-16 x 1-1/2” Gr. 8 | ||
| 29 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 30 | 04001-31 | Bolt, Hex Head 3/8-16 x 2-1/2” | ||
| 31 | 483247 | Spring, Idler RH | ||
| 32 | 424369 | Bracket, Spring Anchor LH 48V | ||
| 33 | 04110-03 | U-Nut, 3/8-16 | ||
| 34 | 461663 | Spindle Assembly | ||
| 35 | 43589 | Shaft, Spindle | ||
| 36 | 481024 | Seal Upper | ||
| 37 | 481022 | Bearing Assembly | ||
| 38 | 48114-04 | Grease Fitting | ||
| 39 | 48677 | Valve, Grease Relief | ||
| 40 | 43644 | Housing, Spindle | ||
| 41 | 43312 | Spacer, Outside | ||
| 42 | 43296 | Spacer, Inside | ||
| 43 | 481025 | Seal, Lower | ||
| 44 | 43297 | Bushing, Bottom | ||
| 45 | 481035 | Nut, Special 1-1/16 - 18 | ||
| 46 | 43590 | Spacer, Spindle | ||
| 47 | 482877 | Cutter Blade 16.5” | ||
| 48 | 483210 | Pulley, Idler 5” Dia. | ||
| 49 | 48224 | Bearing | ||
| 50 | 461940 | Idler Arm Assy. | ||
| 51 | 43689 | Idler Pivot | ||
| 52 | 424322 | Belt Cover (48V) | ||
| 53 | 48926 | Hub, Tapered 1-1/8” Bore | ||
| 54 | 461946 | Idler Arm | ||
| 55 | 04001-172 | Bolt, Hex Head 1/4-20 x 1” Grade 8 | ||
| 56 | 483282 | Pulley 4.75” | ||
| 57 | 424208 | Turbo Baffle, Bolt On | ||
| 58 | 451240 | Push Arm Shaft | ||
| 59 | 461516 | Push Arm (Includes 64,60,62) | ||
| 60 | 04020-16 | Nut, 5/8-18 UNF | ||
| 61 | 04021-13 | Nut, Elastic Stop 5/8-11 | ||
| 62 | 48763 | Rod End, 5/8 Male RH Thread | ||
| 63 | 04001-79 | Bolt, Hex Head 5/8-11 x 4-1/2” | ||
| 64 | 48114-04 | Grease Fitting, 90 Degree | ||
| 65 | 483241 | Belt, Cutter Deck Drive (48V) | ||
| 66 | 04001-09 | Bolt, Hex Head 5/16-18 x 1” | ||
| 67 | 483378 | Spring, Discharge Chute | ||
| 68 | 424173 | Baffle Weldment, 48V | ||
| 69 | 04003-23 | Bolt, Carriage 3/8-16 x 1” | ||
| 70 | 04021-22 | Nut, Elastic Stop 5/16-18 Grade 8 | ||
| 71 | 04043-04 | Flatwasher 3/8” | ||
| 72 | 483239 | Belt, RH Cutter Deck | ||
| 73 | 48181 | Pulley, Idler 5” Dia. | ||
| 74 | 483283 | Pulley, Double Groove | ||
| 75 | 483167 | Bolt, Special | ||
| 76 | 461929 | Lever Assy., Deck Level | ||
| 77 | 04003-40 | Bolt, Carriage 7/16-14 x 1-1/4" | ||
| 78 | 04040-11 | Flatwasher, 7/16-.500 x 1.25 x .083 | ||
| 79 | 04021-11 | Nut, Elastic Stop 7/16-14 | ||
| 80 | 424367 | Dust Shield | ||
| 81 | 04030-03 | Lockwasher 3/8” | ||
| 82 | 424376 | Bracket, Spring Anchor RH | ||
| 83 | 04001-136 | Bolt, Hex Head 3/8-16 x 1-1/2” Gr. 8 | ||
| 84 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 85 | 04021-04 | Nut, Center Lock 5/16-18 | ||
| 86 | 483176 | Wear Pad | ||
| 87 | 43689 | Idler Pivot | ||
| 88 | 04003-12 | Bolt, Carraige 5/16-18 x 3/4” | ||
| 89 | 04040-04 | Flatwasher, 5/16” |
Cutter Deck Controls
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 482624 | Rod, Deck Lift Linkage | ||
| 2 | 04020-28 | Nut, Jam 1/2-20 LH Thread | ||
| 3 | 481766 | Rod End, 1/2-20 Female Thread | ||
| 4 | 04050-10 | Retaining Ring, 1/2” External “E” | ||
| 5 | 483062 | Slide, Deck Height Adjust | ||
| 6 | 43487 | Pin, Deck Lift | ||
| 7 | 423463 | Bracket, Cutting Height Adjustment | ||
| 8 | 04001-22 | Bolt, Hex Head 3/8-16 x 2-3/4” | ||
| 9 | 43668 | Bushing .502 OD | ||
| 10 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 11 | 461874 | Lever, Deck Latch | ||
| 12 | 422346 | Slide, Cutting Height | ||
| 13 | 04014-03 | Screw, Cap 5/16-18 x 3” FHHS | ||
| 14 | 422381 | Guide, Short | ||
| 15 | 04003-04 | Bolt, Carriage 5/16-18 x 1” | ||
| 16 | 422380 | Guide, Long | ||
| 17 | 483177 | Spring, Helper | ||
| 18 | 04021-05 | Nut, 3/8-16 Center Lock | ||
| 19 | 04040-09 | Flatwasher, 5/8-.656 x 1.312 x .095 | ||
| 20 | 04019-04 | Nut, 3/8-16 Serr. Flange | ||
| 21 | 04001-32 | Bolt, Hex Head 3/8-16 x 1-1/4” | ||
| 22 | 43678 | Swivel Joint LH | ||
| 23 | 04061-07 | Cotter Pin, 3/16 x 1” | ||
| 24 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 25 | 04001-20 | Bolt, Hex Head 3/8-16 x 1-1/2” | ||
| 26 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 27 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 28 | 48540 | Chain | ||
| 29 | 48114-04 | Grease Fitting, 1/4-28 Self Tap | ||
| 30 | 483181 | Torsion Spring | ||
| 31 | 461929 | Lever Assy., Deck Level | ||
| 32 | 04004-45 | Stud, 1/2-13 x 20” | ||
| 33 | 04067-09 | Pin | ||
| 481547 | Lanyard | |||
| 34 | 04020-09 | Nut, 5/8-11 UNC | ||
| 35 | 43679 | Swivel Joint RH | ||
| 36 | 04001-155 | Bolt, Hex Head 1/2-13 x 5” | ||
| 37 | 481765 | Rod End, 1/2-20 Female RH Thread | ||
| 38 | 04001-77 | Bolt, Hex Head 3/8-16 x 3-1/2” | ||
| 39 | 43572 | Spacer | ||
| 40 | 04021-02 | Lock Nut, 1/4-20 | ||
| 41 | 43630 | Spacer | ||
| 42 | 04020-27 | Nut, 1/2-20 UNF-2B | ||
| 43 | 04021-10 | Nut, Elastic Stop 5/16-18 | ||
| 44 | 45904 | Lift Bellcrank Weldment, LH Rear | ||
| 45905 | Lift Bellcrank Weldment, RH Rear | |||
| 04041-14 | Flatwasher, 1.0-1.062 x 1.5 x .048 | |||
| 04050-08 | Retaining Ring, 1” ext. | |||
| 45 | 04062-04 | Hair Pin Cotter, .177 x 3-1/4” | ||
| 46 | 481477 | Grip, Deck Latch Lever |
Sheet Metal Components
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 461918 | Main Frame Assembly w/decals | ||
| 2 | 04001-73 | Bolt, Hex Head 5/16-18 x 3-3/4” | ||
| 3 | 482632 | Cushion, Back | ||
| 4 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 5 | 461989 | Plate, Seat Mounting w/decals | ||
| 6 | 482111 | Cushion, Lower Seat | ||
| 7 | 43462 | Pin Retainer, Spring | ||
| 8 | 481389 | Spring | ||
| 9 | Battery (not available through Scag) | |||
| 10 | 423571 | Battery Cover | ||
| 11 | 482553 | Battery Hold Down Pad | ||
| 12 | 04003-12 | Bolt, Carr. 5/16-18 x 3/4” | ||
| 13 | 423556 | Battery Box | ||
| 14 | 04060-01 | Roll Pin, Spring 5/32 x 3/4” | ||
| 15 | 04019-03 | Nut, Serr. Flange 5/16-18 | ||
| 16 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 17 | 482552 | Pad, Rubber | ||
| 18 | 04001-59 | Bolt, Hex Head 1/4-20 x 1-1/4” | ||
| 19 | 04019-02 | Nut, Serr. Flange 1/4-20 | ||
| 20 | 451896 | Seat Base Support | ||
| 21 | 04021-10 | Nut, Elastic Stop 5/16-18 | ||
| 22 | 483385 | Seat Assembly w/ adjustment rails | ||
| 23 | 482108 | Arm Pad, RH | ||
| 482110 | Bracket, Armrest RH | |||
| 24 | 482107 | Arm Pad, LH | ||
| 482109 | Bracket, Armrest LH | |||
| 25 | 482183 | Channel, Armrest | ||
| 26 | 423557 | Footplate | ||
| 27 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 28 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 29 | 48566 | Cable, Seat Stop | ||
| 30 | 451826 | Weldment, Caster Support | ||
| 31 | 481559 | Cap, Grease | ||
| 32 | 04021-20 | Nut, Elastic Stop 1.0-14 | ||
| 33 | 48668 | Bearing Set | ||
| 34 | 482028-01 | Plug, 1/4-28 | ||
| 35 | 481025 | Seal, 2.0” OD x 1.625” ID | ||
| 36 | 04021-07 | Nut, Elastic Stop 1/2-13 | ||
| 37 | 451471 | Yoke, Front Caster Wheel | ||
| 38 | 04001-134 | Bolt, Hex Head 1/2-13 x 7-1/2” | ||
| 39 | 43581 | Sleeve | ||
| 40 | 9277 | Caster Wheel Assembly (Incl. 42, 44, 45) | ||
| 41 | 424112 | Bracket, Hour Meter | ||
| 42 | 482622 | Seal | ||
| 43 | 04001-32 | Bolt, Hex Head 3/8-16 x 1-1/4” | ||
| 44 | 482621 | Roller Bearing | ||
| 45 | 48114-04 | Fitting, Grease | ||
| 46 | 423575 | Mounting Bracket, Oil Tank | ||
| 47 | 423764 | Mounting Bracket, Fuel Tank | ||
| 48 | 482633 | Seat Pan | ||
| 49 | 43584 | Spacer, Caster Wheel | ||
| 50 | 04001-28 | Bolt, Hex Head 7/16-14 x 1-1/4” | ||
| 51 | 04021-11 | Nut, Elastic Stop 7/16-14 | ||
| 52 | 04030-05 | Lockwasher, 7/16” | ||
| 53 | 04030-04 | Lock Washer. 3/8 Spring | ||
| 54 | 04110-03 | U-Nut, 3/8-16 | ||
| 55 | 04003-04 | Bolt, Carriage 5/16-18 x 1” | ||
| 56 | 423912 | Bracket, Fuel Valve | ||
| 57 | 04021-05 | Lock Nut, 3/8-16 Center Lock | ||
| 58 | 483371 | Spring, Seat Latch | ||
| 59 | 451897 | Seat Latch Weldment | ||
| 60 | 04001-100 | Bolt, Hex Head 3/8-16 x 6” | ||
| 61 | 483736 | Seat Assembly w/ adj. rails | ||
| 62 | 483544 | Cushion, Back | ||
| 63 | 483545 | Cushion, Lower Seat | ||
| 64 | 483549 | Arm rest Kit | ||
| 65 | 482635 | Seat Adjustment Track Set |
Roll-Over Protection System
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 9512 | STC Foldable ROPS Accessory (incl. all items listed) | ||
| 2 | 04001-145 | Bolt, Hex Head 1/2-13 x 3-1/2” | ||
| 3 | 04021-19 | Nut, Center Lock 1/2-13 | ||
| 4 | 483412 | Retractable Seat Belt | ||
| 5 | 04040-13 | Flatwasher, 1/2-.562 x 1.375 x .109 | ||
| 6 | 481625-03 | Thumb Screw, 5/16-18 NC x 3/4” | ||
| 7 | 04062-06 | Hair Pin, Cotter | ||
| 8 | 483262 | Pin | ||
| 9 | 04021-19 | Nut, Center Lock 1/2-13 | ||
| 10 | 424407 | Bracket, Stop | ||
| 11 | 04001-145 | Bolt, Hex Head 1/2-13 x 3-1/2” | ||
| 12 | 461990 | Seat Hardware Kit, STC | ||
| 13 | 483451 | Bracket | ||
| 14 | 483412 | Retractable Seat Belt (Seat with Black Arm Rest) | ||
| 461990 | Hardware Package, Seat Belt Mounting |
Drive System Components
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 2 | 04019-04 | Nut, Serrated Flange 3/8-16 | ||
| 3 | 483087 | Spring, Pump Idler | ||
| 4 | 43286 | Spacer | ||
| 5 | 04001-22 | Bolt, Hex Head 3/8-16 x 2-3/4” | ||
| 6 | 461603 | Idler Arm Assy., Pump Drive | ||
| 7 | 04063-14 | Key, 5 x 5 x 25mm | ||
| 8 | 483172 | Belt, Transmission | ||
| 9 | 483415 | Pulley, 3-1/2” Dia. Idler | ||
| 10 | 04043-04 | Flatwasher, 3/8-.391 x .938 x .105 | ||
| 11 | 482744 | Pulley, 5.75 OD Taper Bore | ||
| 12 | 482085 | Hub, Tapered, 15mm Bore | ||
| 13 | 04001-45 | Bolt, 3/8-16 x 2” | ||
| 14 | 43503 | Pivot, Idler | ||
| 15 | 48224 | Bearing | ||
| 16 | 04001-172 | Bolt, Hex Head 1/4-20 x 1” Grade 8 | ||
| 17 | 04001-31 | Bolt, Hex Head 3/8-16 x 2-1/2” | ||
| 18 | 04001-20 | Bolt, Hex Head 3/8-16 x 1-1/2” | ||
| 19 | 483081 | Pulley, 5.75 Dia. - 1.125” Bore | ||
| 20 | 421203 | Clamp Plate | ||
| 21 | 04017-05 | Hex Head Capscrew, 1/4-20 x 3/4” | ||
| 22 | 422969 | Control Lever, Pump | ||
| 23 | 04017-05 | Hex Head Capscrew, 1/4-20 x 3/4” | ||
| 24 | 04030-02 | Lockwasher, 1/4” | ||
| 25 | 48829 | Block, Pump Control | ||
| 26 | 04060-06 | Roll Pin | ||
| 27 | 04001-136 | Bolt, Hex Head 3/8-16 x 1-1/2” Grade 8 | ||
| 28 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 29 | 04001-136 | Bolt, Hex Head 3/8-16 x 1-1/2” Grade 8 | ||
| 30 | 424137 | Bracket | ||
| 31 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 32 | 483215 | Pulley, 5” Dia. Idler |
19KAI – Engine And Attaching Parts (Kawasaki & Kohler)
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 482932 | Engine, Kawasaki (FH601V-AS29) | ||
| 2 | 423770 | Bumper, Rear | ||
| 3 | 424107 | Shield, Rear | ||
| 4 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 482349 | Extension, Oil Drain 4” | |||
| 6 | 04003-23 | Bolt, Carr. 3/8-16 x 1” | ||
| 8 | 483102 | Muffler | ||
| 9 | 424133 | Bracket, Muffler | ||
| 10 | 423555 | Plate, Skid | ||
| 11 | 04001-11 | Bolt, Hex Head 5/16-18 x 1-1/2” | ||
| 12 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 13 | 04011-12 | Screw, Hex Head 5/16-18 x 3/4” Self Tap | ||
| 14 | 04019-03 | Nut, Serr. Flange 5/16-18 | ||
| 15 | 04003-31 | Bolt, Carr. 3/8-16 x 3/4” |
23CV – Engine And Attaching Parts (Kawasaki & Kohler)
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 483281 | Engine, Kohler (PS-75607) | |||
| 2 | 423770 | Bumper, Rear | ||
| 3 | 424107 | Shield, Rear | ||
| 4 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 5 | 482510 | Extension, Oil Drain 2.3” | ||
| 6 | 04003-23 | Bolt, Carr. 3/8-16 x 1” | ||
| 7 | 04104-01 | Bolt, 3/8-16 x 1” Torx | ||
| 483266 | Muffler | |||
| 9 | 424133 | Bracket, Muffler | ||
| 10 | 423555 | Plate, Skid | ||
| 11 | 04001-11 | Bolt, Hex Head 5/16-18 x 1-1/2” | ||
| 12 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 13 | 04011-12 | Screw, Hex Head 5/16-18 x 3/4” Self Tap | ||
| 14 | 04019-03 | Nut, Serr. Flange 5/16-18 | ||
| 15 | 04003-31 | Bolt, Carr. 3/8-16 x 3/4” |
Steering Components
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 482340 | Grip, Control Lever | ||
| 2 | 461914 | Handle Bar, LH (Includes item 1) | ||
| 461923 | Handle Bar, RH (Includes item 1) | |||
| 3 | 04001-09 | Bolt, Hex Head 3/8-16 x 1-1/4” | ||
| 4 | 04030-03 | Lock Washer, 3/8” | ||
| 5 | 483269 | Knob | ||
| 6 | 04040-15 | Flatwasher, 5/16-.375 x .875 x .083 | ||
| 7 | 04060-01 | Roll Pin, Spring 5/32 x 3/4” | ||
| 8 | 483238 | Pivot, Control Lever | ||
| 9 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 10 | 482330 | Rod End, 3/8-24 RH Female | ||
| 11 | 04020-14 | 4020-14 Nut, 3/8-24 RH Thread | ||
| 12 | 482623 | Rod, Pump Control Linkage | ||
| 13 | 04020-17 | Nut, 3/8-24 UNF-2B LH Thread | ||
| 14 | 482331 | Rod End, 3/8-24 LH Thread | ||
| 15 | 43477 | Pin Retainer | ||
| 16 | 04001-20 | Bolt, Hex Head 3/8-16 x 1-1/2” | ||
| 17 | 04001-12 | Bolt, Hex Head 5/16-18 x 1-3/4” | ||
| 18 | 43602 | Spacer, Pump Dampener | ||
| 19 | 423599 | Plate, Control Lever | ||
| 20 | 04001-17 | Bolt, Hex Head 5/16-18 x 2” | ||
| 21 | 482452 | Gas Damper | ||
| 22 | 04001-19 | Bolt, Hex Head 3/8-16 x 1” | ||
| 23 | 482099 | Block, Clamping | ||
| 24 | 04003-12 | Bolt, Carriage, 5/16-18 x 3/4” | ||
| 25 | 461770 | Control Plate - LH (Includes Decal) | ||
| 461771 | Control Plate - RH (Includes Decal) | |||
| 26 | 04019-03 | Nut, Serr., Flange, 5/16-18 | ||
| 27 | 04021-08 | Nut, Elastic Stop 1/4-20 | ||
| 28 | 04001-18 | Bolt, Hex Head 3/8-16 x 3/4” | ||
| 29 | 43616 | Shaft, Steering Control | ||
| 30 | 04021-10 | Nut, Elastic Stop 5/16-18 | ||
| 31 | 48114-04 | Grease Fitting, 1/4-28 Self Tap | ||
| 32 | 43559 | Spacer, Control | ||
| 33 | 49574 | Control Lever Assy RH (Includes 31 & 35) | ||
| 49573 | Control Lever Assy LH (Includes 31 & 35) | |||
| 34 | 04021-10 | Nut, Elastic Stop 5/16-18 | ||
| 35 | 48100-06 | Bushing | ||
| 36 | 04041-08 | Flatwasher, 1-1/4 x 49/64 x 16 Ga. | ||
| 37 | 04050-02 | Retaining Ring, 3/4” Ext. | ||
| 38 | 423057 | Bracket, Switch Actuator | ||
| 39 | 04017-16 | Bolt, Hex Serr. Flange 5/16-18 x 3/4” | ||
| 40 | 04003-02 | Bolt, Carr. 1/4-20 x 3/4” | ||
| 41 | 45918 | Bracket, Control Return | ||
| 42 | 481389 | Spring | ||
| 43 | 483250 | Rubber Spacer | ||
| 44 | 04003-38 | Bolt, Carriage 5/16-18 x 1-1/2” |
Brake Components
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 04019-06 | Nut, Serr. Flange 1/2-13 | ||
| 2 | 48807 | Spring | ||
| 3 | 04001-08 | Bolt, Hex Head 5/16-18 x 3/4” | ||
| 4 | 04001-163 | Bolt, Hex Head 1/2-13 x 3-3/4” | ||
| 5 | 04001-52 | Bolt, Hex Head 1/2-13 x 2-1/2” | ||
| 6 | 04021-19 | Nut, 1/2-13 Center Lock | ||
| 7 | 483190 | Wheel Motor, Hydro-Gear | ||
| 8 | 04063-25 | Key, Woodruff 5/16 x 1” | ||
| 9 | 461438 | Wheel Hub Assembly | ||
| 10 | 483644 | Brake Band Assembly | ||
| 11 | 482061 | Bushing, Self Align | ||
| 12 | 48680 | Nut, Hex Castle 1.0-20 UNEF | ||
| 13 | 04061-06 | Cotter Pin, 9/64 x 1-1/2” | ||
| 14 | 04028-02 | Lug Nut, 1/2-20 | ||
| 15 | 482044 | (48”) Wheel Assembly 23 x 9.5 -12 | ||
| 481659 | (48”) Rim | |||
| 482194 | (48”) Tire 23 x 9.5 - 12 | |||
| 16 | 04004-46 | Brake Rod Stud, 3/8-24 x 8.125” | ||
| 17 | 04020-14 | Nut, 3/8-24 UNF | ||
| 18 | 423279 | Plate Weldment, Motor Backing | ||
| 19 | 04064-16 | Clevis Pin, 3/8 x 1.93” | ||
| 20 | 04069-01 | Pin, Rue Cotter 3/8 Dia. | ||
| 21 | 451970 | Brake Linkage LH | ||
| 451971 | Brake Linkage RH | |||
| 22 | 48114-04 | Grease Fitting, 1/4-28 | ||
| 23 | 04020-25 | Nut, 3/8-24 UNF | ||
| 24 | 04050-01 | Retaining Ring, .625 Ext. | ||
| 25 | 04021-10 | Nut, Elastic Stop 5/16-18 | ||
| 26 | 04041-07 | Flatwasher, 3/8-.391 x .938 x .105 | ||
| 27 | 04001-187 | Bolt, Hex Head 1/2-13 x 2-1/2” Grade 8 | ||
| 28 | 04001-166 | Bolt, Hex Head 3/8-24 x 3-3/4” | ||
| 29 | 04061-02 | Cotter Pin, 3/32 x 3/4” | ||
| 30 | 04001-20 | Bolt, Hex Head 3/8-16 x 1-1/2” | ||
| 31 | 451463 | Brake Shaft | ||
| 32 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 33 | 48544 | Rod End, 3/8-24 LH Thread | ||
| 34 | 04064-02 | Clevis Pin, 3/8 x 1.06” | ||
| 35 | 48343-04 | Clevis, 3/8-24 | ||
| 36 | 482102 | Grip, Brake Lever | ||
| 37 | 04019-04 | Nut, Serr. Flange 3/8-16 | ||
| 38 | 461509 | Brake Lever (includes item 36) | ||
| 39 | 04001-22 | Bolt, Hex Head 3/8-16 x 2-3/4” | ||
| 40 | 04020-17 | Nut, 3/8-24 UNF-2B LH Thread | ||
| 41 | 422483 | Lever, Brake | ||
| 42 | 45974 | Shaft Weldment, Pivot | ||
| 43 | 43495 | Pin, Pivot | ||
| 44 | 04008-01 | Bolt, Serr. Flange 1/2-20 x 4.563” |
Fuel And Hydraulic System
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 482643 | Pump, BDP-10A-316 (LH) | ||
| 482644 | Pump, BDP-10A-419 (RH) | |||
| 2 | 482266-01 | Elbow, 90 Degree 9/16 O-Ring x 3/8 Hose | ||
| 3 | 48572-02 | Fitting, 1/2" JIC x 5/8 O-Ring | ||
| 4 | 48811 | Hose, 3/8 Pushlock (Specify length) | ||
| 5 | 482573 | Bushing | ||
| 6 | 482574 | Fitting | ||
| 7 | 482266-01 | Elbow, 90 Degree 9/16 O-Ring x 3/8 Hose | ||
| 8 | 48136-13 | Hose Clamp, .69 Dia. | ||
| 9 | 482548 | Hose Assembly | ||
| 10 | 04060-06 | Roll Pin | ||
| 11 | 48572-04 | Fitting, 1/2" JIC x 1/2" O-Ring | ||
| 12 | 48603-06 | O-Ring | ||
| 13 | 04001-20 | Bolt, Hex Head 3/8-16 x 1-1/2" | ||
| 14 | 04017-07 | Bolt, Hex Head 1/4-20 x 1-1/4" | ||
| 15 | 04030-02 | Lockwasher | ||
| 16 | 04021-09 | Nut, Elastic Stop 3/8-16 | ||
| 17 | 422969 | Control Lever | ||
| 18 | 04001-08 | Bolt, Hex Head 5/16-18 x 3/4" | ||
| 19 | 04030-03 | Lockwasher, 5/16" | ||
| 20 | 04040-15 | Flatwasher, 5/16-.375 x .875 x .083 | ||
| 21 | 481164 | Cap, Hydraulic Tank | ||
| 22 | 481507 | Insert, Filler Neck | ||
| 23 | 48829 | Control Block | ||
| 24 | 421203 | Clamp Plate | ||
| 25 | 461479 | Hydraulic Tank Assembly w/fittings | ||
| 26 | 48603-06 | O-Ring, 9/16" | ||
| 27 | 482277 | Tee Fitting, O-Ring to Barb | ||
| 28 | 48136-13 | Clamp, .69 Max. / .25 Min. Dia. | ||
| 29 | 482571 | Bushing | ||
| 30 | 482572 | Elbow, 0.38 Hose | ||
| 31 | 48136-13 | Clamp | ||
| 32 | 483617 | Fuel Hose, 1/4 ID (order by the inch) | ||
| 33 | 423912 | Bracket Fuel Valve | ||
| 34 | 48059-01 | Clamp, Fuel Hose 1/4 Hose ID | ||
| 35 | 482212 | Valve, Fuel Shutoff | ||
| 36 | 48136-13 | Clamp, .69 Max. / .25 Min. Dia. | ||
| 37 | 482800-02 | Fitting, 9/16 O-Ring x 3/8" Hose | ||
| 38 | 04019-03 | Nut, Serr. Flange 5/16-18 | ||
| 39 | 04041-07 | Flatwasher, 3/8-.391 x .938 x .105 | ||
| 40 | 48462-01 | Oil Filter | ||
| 41 | 482798 | Filter Head Assembly | ||
| 42 | 482800-01 | Fitting, 3/4 O-Ring x 3/8 Hose | ||
| 43 | 48604-03 | Plug, 9/16-18 O-Ring | ||
| 44 | 482557 | Hose, Filter Inlet | ||
| 45 | 461969 | Fuel Tank RH | ||
| 46 | 482547 | Cap, Fuel Tank (incl. item #53) | ||
| 47 | 48309 | Tank Bushing | ||
| 48 | 48939 | Elbow, 90 Degree | ||
| 49 | 461476 | Fuel Tank LH | ||
| 50 | 48811 | Hose, 3/8 Pushlock 15" Long | ||
| 51 | 04001-17 | Bolt, Hex Head 5/16-18 x 2" | ||
| 52 | 04010-10 | Screw, 1/4-20 x 2" | ||
| 53 | 482774 | Gasket, Gas Tank Cap | ||
| 54 | Fuel Filter | Available through the individual engine manufacturer. | ||
| 55 | 482605 | Hose Assembly | ||
| 56 | 04001-11 | Bolt, Hec Head 5/16-18 x 1-1/2" | ||
| 57 | 482802 | Nipple, Oil Filter 1.0-12 UNF-2A x 1-1/4" | ||
| 58 | 48603-02 | O-Ring, 3/4" |
Electrical System
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 483355 | Hourmeter | ||
| 2 | 48298 | Fuse, 20 amp | ||
| 3 | 483366 | Key, Ignition | ||
| 462069 | Key Assembly w/Fob | |||
| 4 | 48017-04 | Nut, Hex 5/8-32 | ||
| 5 | 48017-03 | Lockwasher, 5/8” Internal | ||
| 6 | 461660 | Electric PTO Clutch GT3.5 | ||
| 7 | 48798 | Switch, Ignition | ||
| 8 | 483162 | Switch, PTO | ||
| 9 | 483013 | Relay | ||
| 10 | 04031-01 | Lock Washer, #10 External Tooth | ||
| 11 | 04020-01 | Nut, Hex #10-32 | ||
| 12 | 481637 | Switch, N/O | ||
| 13 | 461768 | Panel, Instrument | ||
| 14 | 482032 | Choke & Throttle Control - Kawasaki (Qty 2) | ||
| 481544 | Choke Control - Kohler (Qty 1) | |||
| 15 | 482032 | Throttle Control - Kohler ( Qty 1) | ||
| 16 | 481638 | Switch, Seat | ||
| 17 | 483029 | Module, Interlock | ||
| 18 | 04010-01 | Screw, #10-32 x .5” Phillips Head | ||
| 19 | 483420 | Battery, 330CCA (Not Available Through Scag) | ||
| 20 | 04001-44 | Bolt, Hex Head 1/4-20 x .5” | ||
| 21 | 04020-02 | Nut, Hex 1/4-20 | ||
| 22 | 48029-15 | Cable, Battery Black (negative) | ||
| 23 | 48029-12 | Cable, Battery Red (positive) | ||
| 24 | 483618 | Wiring Harness, Main | ||
| 25 | 483081 | Pulley, 5.45 OD x 1.125” Bore | ||
| 26 | 04021-10 | Nut, Elastic Stop 5/16-18 Key | ||
| 27 | 424112 | Mounting Bracket, Hour Meter | ||
| 28 | 04010-11 | Screw, #10-32 x 1.5” Phillips Head | ||
| 29 | 482543 | Adaptor, Wiring Harness (Kawasaki only) | ||
| 482094 | Adaptor, Wiring Harness (Kohler only) | |||
| 30 | 04063-23 | Key, 1/4 x 1/4 x 3-1/4” | ||
| 31 | 04041-28 | Flatwasher, 7/16-.469 x 1-3/4” x 1/4” | ||
| 32 | 04030-05 | Lockwasher, 7/16” | ||
| 33 | 04001-101 | Bolt, Hex Head 7/16-20 x 2-1/2” UNF | ||
| 34 | 04010-12 | Screw, #10-32 x 3/4” | ||
| 35 | 04001-08 | Bolt, Hex Head 5/16-18 x 3/4” | ||
| 36 | 04030-03 | Lockwasher, 5/16” | ||
| 37 | 04040-15 | Flatwasher, 5/16-.375 x .875 x .083 | ||
| 38 | 423909 | Backing Plate | ||
| 39 | 481716 | Rubber Pad, Clutch Stop | ||
| 40 | 422534 | Plate, Backing | ||
| 41 | 48030-09 | Clamp | ||
| 42 | 483629 | Fuse Holder | ||
| 43 | 483571 | Cover, Sealed Double | ||
| 44 | 482588 | Clip, Wire | ||
| 45 | 483642 | Double Fuse Assembly, Sealed (Incl. items 2, 42, 43, 44) |
Hydraulic Pump Assembly
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | HG 70516 | Housing Kit | ||
| 2 | HG 70573 | End Cap Kit | ||
| 3 | HG 50641 | Straight Headless Pin | ||
| 4 | HG 50969 | Hex Flange Bolt, M8-1.25 x 60mm | ||
| 5 | HG 51232 | Housing O-Ring | ||
| 6 | HG 2513027 | Charge Pump Kit | ||
| 7 | HG 50273 | Gerotor Assembly | ||
| 8 | HG 9004101-1340 | O-Ring | ||
| 9 | HG 50095 | Socket Head Screw, M6 x 1.0-20mm | ||
| 10 | HG 2513030 | Bypass Valve Kit | ||
| 11 | HG 70521 | Pumpshaft Kit | ||
| 12 | HG 50315 | Ball Bearing, 17 x 40 x 12 | ||
| 13 | HG 51161 | Lip Seal | ||
| 14 | HG 50329 | Retaining Ring | ||
| 15 | HG 50951 | Spacer | ||
| 16 | HG 70331 | Cylinder Block Kit | ||
| 17 | HG 2003014 | Block Spring | ||
| 18 | HG 2003017 | Block Thrust Washer | ||
| 19 | HG 51444 | Valve Plate | ||
| 20 | HG 2003087 | Swash Plate | ||
| 21 | HG 50551 | Ball Thrust Bearing | ||
| 22 | HG 2003005 | Trunnion Arm | ||
| 23 | HG 2000015 | Slot Guide | ||
| 24 | HG 2510062 | Check Valve Kit (.024” Orfice) port “A” on Left Hand Pump, port “B” on Right Hand Pump | ||
| 25 | HG 70403 | Charge Relief Kit | ||
| 26 | HG 2513043 | Trunnion Seal with Retainer | ||
| 27 | HG 9005110-4400 | Straight Thread Plug | ||
| 28 | HG 50408 | Straight Headless Pin | ||
| 29 | HG 70525 | Overhaul Seal Kit | ||
| 30 | HG 70743 | System Check Relief Kit, port “B” on Left Hand Pump, port “A” on Right Hand Pump |
Replacement Decals And Information Plates
| ID | Parts Number | Parts Description | Notes | Purchase |
|---|---|---|---|---|
| 1 | 483407 | Decal, Danger-Spinning Blades | ||
| 2 | 483406 | Decal, Warning-Rotating Blades | ||
| 3 | 483199 | Decal, 48V | ||
| 4 | 483158 | Decal, ROPS | ||
| 5 | 483044 | Decal, Patents | ||
| 6 | 482100 | Decal, Traction Control | ||
| 7 | 481971 | Decal, Heavy Duty Commercial | ||
| 8 | 48404 | Decal, Metalcraft - Made in USA | ||
| 9 | 483402 | Decal, Belt Cover | ||
| 10 | 482982 | Decal, Instrument Panel | ||
| 11 | 482835 | Decal, Fuel Valve Position | ||
| 12 | 482566 | Decal, Cutting Height Bottom Row of Holes | ||
| 13 | 482578 | Decal, Tiger Cub | ||
| 14 | 482709 | Decal, Seat Support | ||
| 15 | 482579 | Decal, Rear Bumper | ||
| 16 | 482166 | Decal, Front Footplate | ||
| 17 | 483405 | Decal, Discharge Chute | ||
| 18 | 482549 | Decal, Cutting Height Top Row of Holes | ||
| 461983 | Spanish Decal Kit, STC / STWC (not shown) |